Specifications

6-11
Error Messages
Error Messages in Alphabetical Order
ECal: SELECT OTHER MODULE
Error Number
221
This error occurs when two ECal modules are connected. The selected ECal
module may not be able to measure the selected frequency range. Check the
frequency range of the other module and connect in the RF path.
ECal: THRU STATE
Information
Message
This message is displayed when the ECal module is set to the thru state.
EXCEEDED 7 STANDARDS PER CLASS
Error Number
72
When modifying calibration kits, you can define a maximum of seven standards
for any class.
FILE NOT COMPATIBLE WITH INSTRUMENT
Information
Message
You cannot recall user graphics that had been saved on an earlier model of
analyzer with a monochrome display. These files cannot be used with the
analyzer.
FILE NOT FOUND
Error Number
192
The requested file was not found on the current disk medium.
FILE NOT FOUND OR WRONG TYPE
Error Number
197
During a recall operation, either the file was not found or the type of file was not
an instrument state file.
FIRST CHARACTER MUST BE A LETTER
Error Number
42
The first character of a disk file title or an internal save register title must be an
alpha character.
FORMAT NOT VALID FOR MEASUREMENT
Error Number
75
Conversion measurements (Z or Y reflection and transmission) are not valid
with Smith chart and SWR formats.
FORMATTING DATA
Information
Message
The list information is being processed for a list data output to a copy device and
stored in the copy spool buffer. During this time, the analyzer's resources are
dedicated to this task (which takes less than a few seconds).