Specifications

5-65
Hardkey/Softkey Reference
Analyzer Functions
outputs a title string to any device with an GPIB address
that matches the address set with the analyzer
commands.
This softkey is generally used for two purposes:
• Sending a title to a printer for data logging or
documentation purposes.
• Sending commands to a printer or other GPIB device.
is located in the ECal confidence menu and ECal service
menu. This softkey allows you to display the ECal module
factory response and measurement datain different forms.
The choices include: DATA, DATA&MEM, DATA/MEM,
DATA-MEM, and MEM.
is used in conjunction with other search features to track
the search with each new sweep. Turning tracking on
makes the analyzer search every new trace for the
specified target value and put the active marker on that
point. If bandwidth search is on, tracking searches every
new trace for the specified bandwidth, and repositions the
dedicated bandwidth markers.
When tracking is off, the target is found on the current
sweep and remains at the same stimulus value regardless
of changes in trace response value with subsequent
sweeps.
A maximum and a minimum point can be tracked
simultaneously using two channels and uncoupled
markers.
provides a transmission (same as S21) and reflection
(same as S11) enhanced response calibration (forward
direction). Enhanced response generates a 1-port cal for
reflection and an improved calibration over the response
cal for transmission. (ET only)
defines the measurement as S
21
, the complex forward
transmission coefficient (magnitude and phase) of the test
device.
defines the measurement as S
12
, the complex reverse
transmission coefficient (magnitude and phase) of the test
device.
(Option 010 only) leads to a series of menus that transform
the measured data from the frequency domain to the time
domain.
(Option 010 only) switches between time domain
transform on and off.
TITLE TO PRNTR/GPIB
Local
SET ADDRESSES
ADDRESS: PRINTER
TRACE TYPE [DATA]
TRACKING on OFF
TRAN/REFL ENH. RESP.
TRANS: FWD S21 (B/R)
TRANS: REV S12 (A/R)
TRANSFORM MENU
TRANSFORM on OFF