Specifications

5-64
Hardkey/Softkey Reference
Analyzer Functions
presents the title menu in the softkey labels area and the
character set in the active entry area. These are used to
label the active channel display. A title more menu allows
up to four values to be included in the printed title active
entry, active marker amplitude, limit test results, and loop
counter value.
allows the operator to rename any sequence with an eight
character title. All titles entered from the front panel must
begin with a letter, and may only contain letters and
numbers. A procedure for changing the title of a sequence
is provided at the beginning of this chapter.
moves the title string data obtained with the
command into a data array.
strips off leading characters that
are not numeric, reads the numeric value, and then
discards everything else. The number is converted into
analyzer internal format, and is placed into the real
portion of the memory trace at:
Display point = total points − 1 − loop counter
If the value of the loop counter is zero, then the title
number goes in the last point of memory. If the loop
counter is greater than or equal to the current number of
measurement points, the number is placed in the first
point of memory. A data to memory command must be
executed before using the title to memory command.
outputs a title string to any device with an GPIB address
that matches the address set with the analyzer
commands.
This softkey is generally used for two purposes:
• Sending a title to a printer when a CR-LF is not
desired.
• Sending commands to an GPIB device.
outputs a title string to any device with an GPIB address
that matches the address set with the analyzer
commands. This softkey is generally used for two
purposes:
• Sending a title to a printer when a CR-LF is not
desired.
• Sending commands to an GPIB device.
TITLE
TITLE SEQUENCE
TITLE TO MEMORY
P MTR/GPIB TO TITLE
TITLE TO MEMORY
TITLE TO P MTR/GPIB
Local
SET ADDRESSES
ADDRESS: P MTR/GPIB
TITLE TO PERIPHERAL
Seq
SPECIAL FUNCTIONS
PERIPHERAL GPIB ADDR