Specifications

5-63
Hardkey/Softkey Reference
Analyzer Functions
is used to specify the (arbitrary) impedance of the
standard, in Ωs.
is used to set configurations before running the service
tests.
is used to direct the RF power to port 1 or port 2. (For
non-S parameter inputs only.)
is used to support specialized test sets, such as a test set
that measures duplexers. It allows you to set three bits
(D1, D2, and D3) to a value of 0 to 7, and outputs it as
binary from the rear panel test set connector. It tracks the
coupling flag, so if coupling is on, and FWD channel 1 is
the active channel, FWD channel 2 will be set to the same
value.
is used to support specialized test sets, such as a test set
that measures duplexers. It allows you to set three bits
(D1, D2, and D3) to a value of 0 to 7, and outputs it as
binary from the rear panel test set connector. It tracks the
coupling flag, so if coupling is on, and REV channel 1 is the
active channel, REV channel 2 will be set to the same
value.
toggles the internal solid state switch from a hold mode, to
a continuously switching mode, or to a number of sweeps
mode when full 2-port correction is enabled. Use for fast
2-port calibration. (ES only)
presents the service test menu.
selects all the non-data display text for color modification.
For example: operating parameters.
brings up the print color definition menu. The default color
for text is black.
sets the format of the text file when is
selected. The only text selection currently available is the
comma separated values (CSV) format.
a calibration standard type.
measures all four S-parameters in a TRL/LRM calibration.
turns the time stamp function on or off.
adjusts the continuum of hues on the color wheel of the
chosen attribute. Refer to the section on adjusting the
display color in the “Making Measurements” chapter of
the user’s guide for an explanation of using this softkey for
color modification of display attributes.
TERMINAL IMPEDANCE
TEST OPTIONS
TESTPORT 1 2
TESTSET I/O FWD
TESTSET I/O REV
TESTSET SW CONTINUOUS
TESTS
TEXT
TEXT [ ]
TEXT FMT [ ]
FILETYPE: TEXT
THRU
THRU THRU
TIME STAMP on OFF
TINT