Specifications

5-57
Hardkey/Softkey Reference
Analyzer Functions
allows you to set the month in the analyzer's internal
clock.
sets the measurement reference plane to the TRL/LRM
REFLECT standard.
sets the measurement reference plane to the TRL/LRM
THRU standard.
allows you to set the year in the analyzer's internal clock.
sets the characteristic impedance used by the analyzer in
calculating measured impedance with Smith chart
markers and conversion parameters. Characteristic
impedance must be set correctly before calibration
procedures are performed.
sets up four-graticule, four-channel display as described in
the menu. All four graticules are
in log format.
sets up two-graticule, four-channel display as described in
the menu.
sets up single-graticule, four-channel display as described
in the menu.
sets up four-graticule, four-channel display as described in
the menu. Two of the graticules
are in Smith chart format with the other two in log format.
sets up two-graticule, four-channel display as described in
the menu.
sets up three-graticule, three-channel display as described
in the menu.
for cal kits with different models for male and female test
port standards, this selects the short model for a female
test port. Note that the sex of a calibration standard
always refers to the test port.
for cal kits with different models for male and female test
port standards, this selects the short model for a male test
port. Note that the sex of a calibration standard always
refers to the test port.
short calibration standard.
used to display a specific menu prior to a pause statement
in a sequence.
takes one sweep of data and returns to the hold mode.
SET MONTH
SET REF: REFLECT
SET REF: THRU
SET YEAR
SET Z0
SETUP A
4 PARAM HELP KEYS
SETUP B
4 PARAM HELP KEYS
SETUP C
4 PARAM HELP KEYS
SETUP D
4 PARAM HELP KEYS
SETUP E
4 PARAM HELP KEYS
SETUP F
4 PARAM HELP KEYS
SHORT (F)
SHORT (M)
SHORT
SHOW MENUS
SINGLE