Specifications
5-55
Hardkey/Softkey Reference
Analyzer Functions
turns off the marker search function.
searches for the user-specified target point on the trace.
specifies which limit segment in the table is to be modified.
A maximum of three sets of segment values are displayed
at one time, and the list can be scrolled up or down to show
other segment entries. Use the entry block controls to
move the pointer > to the required segment number. The
indicated segment can then be edited or deleted. If the
table of limits is designated “EMPTY,” new segments can
be added using the or softkey.
sets the center frequency of a subsweep in a list frequency
sweep.
enters the IF bandwidth for the active segment in a swept
list table. This key is disabled if is
set to OFF.
enters absolute power values in the swept list table. The
power values are restricted to the current power range
setting.
If port power is uncoupled, power applies to the currently
selected port, otherwise it applies to both ports. (The list
table only displays one port's power values at time due to
limited display area.) To set the alternate port's power
level, you must exit the edit list menus, select a
measurement that activates the alternate port, and then
re-enter the edit list menus.
This key is disabled if is set to .
sets the frequency or power span of a subsweep about a
specified center frequency.
sets the start frequency of a subsweep.
sets the stop frequency of a subsweep.
leads to the select quadrant menu, which provides the
capability of drawing quarter-page plots.
provides access to the select disk menu.
The active entry area displays the letters of the alphabet,
digits 0 through 9, and mathematical symbols. To define a
title, rotate the knob until the arrow ↑ points at the first
letter, then press . Repeat this until
the complete title is defined, for a maximum of 50
characters. As each character is selected, it is appended to
the title at the top of the graticule.
SEARCH: OFF
SEARCH: TARGET
SEGMENT
ADD
EDIT
SEGMENT: CENTER
SEGMENT IF BW
LIST IF BW on OFF
SEGMENT POWER
LIST POWER
OFF
SEGMENT: SPAN
SEGMENT: START
SEGMENT: STOP
SEL QUAD
SELECT DISK
SELECT LETTER
SELECT LETTER