Specifications

5-54
Hardkey/Softkey Reference
Analyzer Functions
stores the user-modified or user-defined kit into memory,
after it has been modified.
selects ASCII format for data storage to disk.
selects binary format for data storage.
provides access to all the menus used for saving and
recalling instrument states in internal memory and for
storing to, or loading from the internal or external disk.
This includes the menus used to define titles for internal
registers and external disk files, to define the content of
disk files, to initialize disks for storage, and to clear data
from the registers or purge files from disk.
changes the response value scale per division of the
displayed trace. In polar and Smith chart formats, this
refers to the full scale value at the outer circumference,
and is identical to reference value.
toggles between two selections for plot scale, FULL and
GRAT.
is the normal scale selection for plotting on blank paper. It
includes space for all display annotations such as marker
values, stimulus values, etc. The entire display fits within
the user-defined boundaries of P1 and P2 on the plotter,
while maintaining the exact same aspect ratio as the
display.
expands or reduces the horizontal and vertical scale so
that the lower left and upper right graticule corners
exactly correspond to the user-defined P1 and P2 scaling
points on the plotter. This is convenient for plotting on
preprinted rectangular or polar forms (for example, on a
Smith Chart).
makes scale per division the active function. A menu is
displayed that is used to modify the vertical axis scale and
the reference line value and position. In addition this
menu provides electrical delay offset capabilities for
adding or subtracting linear phase to maintain phase
linearity.
searches the trace for the next occurrence of the target
value to the left.
searches the trace for the next occurrence of the target
value to the right.
moves the active marker to the maximum point on the
trace.
moves the active marker to the minimum point on the
trace.
SAVE USER KIT
SAVE USING ASCII
SAVE USING BINARY
Save/Recall
SCALE/DIV
SCALE PLOT [ ]
SCALE PLOT [FULL]
SCALE PLOT [GRAT]
Scale Ref
SEARCH LEFT
SEARCH RIGHT
SEARCH: MAX
SEARCH: MIN