Specifications

5-45
Hardkey/Softkey Reference
Analyzer Functions
when displaying list values, prints the entire list in
monochrome. When displaying operating parameters,
prints all but the last page in monochrome. The data is
sent to the printer as ASCII text rather than as raster
graphics, which causes the printout to be faster.
sets the print command to default to a color printer. The
printer output is always in the analyzer default color
values. This command does not work with a black and
white printer.
prints the displayed measurement results in color.
is used to select the print colors menu.
sets the print command to default to a black and white
printer.
prints the displayed measurement results in black and
white.
prints any sequence currently in memory to a compatible
printer.
sets the serial port data transmission speed for prints.
sends a conditional form feed to the printer.
configures the port the analyzer will use to communicate
with the printer.
directs prints to the GPIB port and sets the GPIB address
the analyzer will use to communicate with the printer.
configures the analyzer for a printer that has a parallel
(centronics) interface.
configures the analyzer for a printer that has a serial
(RS-232) interface.
sets the printer type to the DeskJet series.
sets the printer type to Epson compatible printers, which
support the Epson ESC/P2 printer control language.
sets the printer type to the LaserJet series.
sets the printer type to the PaintJet.
sets the printer type to the ThinkJet or QuietJet.
sets the power level directly from the power DAC.
PRINT ALL MONOCHROME
PRINT: COLOR
PRINT COLOR
PRINT COLORS
PRINT: MONOCHROME
PRINT MONOCHROME
PRINT SEQUENCE
PRINTER BAUD RATE
PRINTER FORM FEED
PRINTER PORT
PRNTR PORT GPIB
PRNTR PORT PARALLEL
PRNTR PORT SERIAL
PRNTR TYPE [DESKJET]
PRNTR TYPE [EPSON-P2]
PRNTR TYPE [LASERJET]
PRNTR TYPE [PAINTJET]
PRNTR TYPE [THINKJET]
PWR DAC on OFF