Specifications

5-42
Hardkey/Softkey Reference
Analyzer Functions
adds or subtracts a phase offset that is constant with
frequency (rather than linear). This is independent of
and .
(Option 010 only) displays a Cartesian format of the phase
portion of the data, measured in degrees. This format
displays the phase shift versus frequency.
makes a hard copy plot of one page of the tabular listing
on the display, using a compatible HP plotter connected to
the analyzer through GPIB. This method is appropriate
when speed of output is not a critical factor.
specifies whether the data trace is to be drawn (on) or not
drawn (off) on the plot.
specifies whether the graticule and the reference line are
to be drawn (on) or not drawn (off) on the plot. Turning
and all other elements off is a
convenient way to make preplotted grid forms. However,
when data is to be plotted on a preplotted form,
should be selected.
specifies whether the memory trace is to be drawn (on) or
not drawn (off) on the plot. Memory can only be plotted if it
is displayed (refer to the “Making Measurements” chapter
in the user’s guide).
specifies whether the markers and marker values are to be
drawn (on) or not drawn (off) on the plot.
supplies a name for the plot file generated by a PLOT to
disk. Brings up the TITLE FILE MENU.
toggles between fast and slow speeds.
selects plotting of all displayed text except the marker
values, softkey labels, and display listings such as the
frequency list table or limit table. (Softkey labels can be
plotted under the control of an external controller. Refer to
the programmer’s guide.)
sets the serial port data transmission speed for plots.
sends a page eject command to the plotter.
configures the port analyzer will use to communicate with
the plotter.
directs plots to the selected disk (internal or external).
directs plots to the GPIB port and sets the GPIB address
the analyzer will use to communicate with the plotter.
configures the analyzer for a plotter that has a parallel
(centronics) interface.
PHASE OFFSET
MARKER
→
DELAY
ELECTRICAL DELAY
PHASE
PLOT
PLOT DATA ON off
PLOT GRAT ON off
PLOT GRAT ON
PLOT GRAT OFF
PLOT MEM ON off
PLOT MKR ON off
PLOT NAME PLOTFILE
PLOT SPEED [ ]
PLOT TEXT ON off
PLOTTER BAUD RATE
PLOTTER FORM FEED
PLOTTER PORT
PLTR PORT: DISK
PLTR PORT GPIB
PLTR PORT PARALLEL