Specifications

5-26
Hardkey/Softkey Reference
Analyzer Functions
sets the format of the graphic file when
is selected. The only graphic
selection currently available is the JPEG format.
specifies whether or not to store display graphics on disk
with the instrument state.
brings up the graticule print color definition menu. The
graticule default print color is cyan.
selects the display graticule for color modification.
provides an on-line quick reference guide to using the
adapter removal technique.
freezes the data trace on the display, and the analyzer
stops sweeping and taking data. The notation “Hld” is
displayed at the left of the graticule. If the * indicator is on
at the left side of the display, trigger a new sweep with
.
is used to select the bandwidth value for IF bandwidth
reduction. Allowed values (in Hz) are 6000, 3700, 3000,
1000, 300, 100, 30, and 10. Any other value will default to
the closest allowed value. A narrow bandwidth slows the
sweep speed but provides better signal-to-noise ratio. The
selected bandwidth value is shown in brackets in the
softkey label.
jumps to one of the six sequence positions (SEQUENCE 1
through 6) if the limit test fails. This command executes
any sequence residing in the selected position. Sequences
may jump to themselves as well as to any of the other
sequences in memory. When this softkey is pressed, the
analyzer presents a softkey menu showing the six
sequence positions and the titles of the sequences located
in them. Choose the destination sequence to be called if
the limit test fails.
jumps to one of the six sequence positions (SEQUENCE 1
through 6) if the limit test passes. This command executes
any sequence residing in the selected position. Sequences
may jump to themselves as well as to any of the other
sequences in memory. When this softkey is pressed, the
analyzer presents a softkey menu showing the six
sequence positions, and the titles of the sequences located
in them. Choose the sequence to be called if the limit test
passes (destination sequence).
prompts the user to select a destination sequence position
(SEQUENCE 1 through 6). When the value of the loop
counter reaches zero,the sequence in the specified position
will run.
GRAPH FMT [ ]
FILETYPE: GRAPHIC
GRAPHICS on OFF
GRATICULE [ ]
GRATICULE
HELP ADAPT REMOVAL
HOLD
SINGLE
IF BW [ ]
IF LIMIT TEST FAIL
IF LIMIT TEST PASS
IF LOOP COUNTER = 0