Specifications

5-25
Hardkey/Softkey Reference
Analyzer Functions
displays the complex admittance values of the active
marker in rectangular form. The active marker values are
displayed in terms of conductance (in Siemens),
susceptance, and equivalent capacitance or inductance.
Siemens are the international units of admittance, and are
equivalent to mhos (the inverse of Ωs). The Smith chart
graticule is changed to admittance form.
giga/nano (10
9
/ 10
−9
). Used to terminate numeric entries.
(Option 010 only) turns gating on or off in time domain
mode.
(Option 010 only) allows you to specify the time at the
center of the gate.
(Option 010 only) allows you to specify the gate periods.
(Option 010 only) allows you to specify the starting time of
the gate.
(Option 010 only) allows you to specify the stopping time of
the gate.
(Option 010 only) leads to the gate shape menu.
(Option 010 only) selects the widest time domain gate with
the smallest passband ripple.
(Option 010 only) selects the narrowest time domain gate
with the largest passband ripple.
(Option 010 only) selects an intermediate time domain
gate.
(Option 010 only) selects an intermediate time domain
gate.
copies the sequence titles currently in memory into the six
softkey positions.
calls sub-routines in sequencing.
toggles the GPIB diagnostic feature (debug mode). This
mode should only be used the first time a program is
written: if a program has already been debugged, it is
unnecessary.
When diagnostics are on, the analyzer scrolls a history of
incoming GPIB commands across the display in the title
line. Nonprintable characters are represented as pi. If a
syntax error is received, the commands halt and a pointer
wedge indicates the misunderstood character. For
information on clearing a syntax error, refer to the
programmer's guide.
G+jB MKR
G/n
GATE on OFF
GATE: CENTER
GATE: SPAN
GATE: START
GATE: STOP
GATE SHAPE
GATE SHAPE MAXIMUM
GATE SHAPE MINIMUM
GATE SHAPE NORMAL
GATE SHAPE WIDE
GET SEQ TITLES
GOSUB SEQUENCE
GPIB DIAG on off