Specifications

5-12
Hardkey/Softkey Reference
Analyzer Functions
—
—
—
this default selection establishes the TRL/LRM
LINE/MATCH standard as the characteristic impedance.
allows you to modify the characteristic impedance of the
system for TRL/LRM calibration.
leads to the calibration menu, which provides several
accuracy enhancement procedures ranging from a simple
frequency response calibration to a full two-port
calibration. At the completion of a calibration procedure,
this menu is returned to the screen, correction is
automatically turned on, and the notation Cor or C2 is
displayed at the left of the screen.
is used, along with the key, to define the frequency
range of the stimulus. When the key is pressed,
its function becomes the active function. The value is
displayed in the active entry area, and can be changed
with the knob, step keys, or numeric keypad.
sets the center frequency of a subsweep in a list frequency
sweep.
brings up the printer color selection menu. The channel 1
data trace default color is magenta for color prints.
selects channel 1 data trace and limit line for display color
modification.
selects channel 1 memory trace for display color
modification.
brings up the printer color selection menu. The channel 1
memory trace default color is green for color prints.
brings up the printer color selection menu. The channel 2
data trace default color is blue for color prints.
selects channel 2 data trace and limit line for display color
modification.
selects channel 2 memory trace for display color
modification.
brings up the printer color selection menu. The channel 2
memory trace default color is red for color prints.
brings up the printer color selection menu. The channel 3
data trace default color is magenta for color prints.
N 50
Ω
85054
N 75
Ω
85036
TRL 3.5mm 85052C
CAL Z0: LINE Z0
CAL Z0: SYSTEM Z0
CALIBRATE MENU
Center Span
Center
CENTER
CH1 DATA [ ]
CH1 DATA LIMIT LN
CH1 MEM
CH1 MEM [ ]
CH2 DATA [ ]
CH2 DATA LIMIT LN
CH2 MEM
CH2 MEM [ ]
CH3 DATA [ ]