Specifications

5-11
Hardkey/Softkey Reference
Analyzer Functions
key leads to a series of menus to perform measurement
calibrations for vector error correction (accuracy
enhancement), and for specifying the calibration
standards used. The key also leads to softkeys
which activate interpolated error correction and power
meter calibration.
accepts a power sensor calibration factor % for the
segment.
brings up the segment modify menu and segment edit
(calibration factor menu) which allows you to enter a
power sensor's calibration factors. The calibration factor
data entered in this menu will be stored for power sensor
A.
sets the preset state of interpolated error-correction on or
off.
brings up the segment modify menu and segment edit
(calibration factor menu) which allows you to enter a
power sensor's calibration factors. The calibration factor
data entered in this menu will be stored for power sensor
B.
indicates the currently selected cal kit and leads to the
select cal kit menu, which is used to select one of the
default calibration kits available for different connector
types. This, in turn, leads to additional menus used to
define calibration standards other than those in the
default kits (refer to “Modifying Calibration Kits” in the
“Operating Concepts” chapter of the user’s guide). When a
calibration kit has been specified, its connector type is
displayed in brackets in the softkey label. The cal kits
available are listed below, refer to the softkey descriptions
for these softkeys for more information.
—
—
—
—
—
—
—
—
—
Cal
CAL
CAL FACTOR
CAL FACTOR SENSOR A
CAL INTERP ON off
CAL FACTOR SENSOR B
CAL KIT [ ]
2.4mm 85056
2.92* 85056K
2.92mm other kits
3.5mmC 85033C
3.5mmE 85033D/E
3.5mmD 85052D
7-16 85038
7mm 85050
N 50
Ω
85032F