Specifications

ZVx DISPlay Subsystem

1043.0009.50 3.49 E-15

DISPlay[:WINDow[1 to 4]]:TRACe[1|2]:Y[:SCALe]:BOTTom

This command defines the lower edge of the grid. In addition to the units given in the table, the

following units and prefixes are permitted for the individual measured quantities:

Power: DBM, DB, DBW, W, MW, UW, NW, PW

Voltage: V, MV, UV, NV, PV, DBV, DBMV, DBUV

Phase: DEG, KDEG, MDEG, UDEG, NDEG, PDEG

Group delay: S, MS, US, NS, PS

Impedance: OHM, GOHM, MOHM, KOHM

Admittance: SIE, MSIE, USIE, NSIE

Inductivity: H, MH, UH, NH, PH, FH

Capacity: F, MF, UF, NF, PF, FF

Dimensionless: UNIT, MUNIT, UUNIT, NUNIT, PUNIT, FUNIT

Syntax: DISPlay[:WINDow[1 to 4]:TRACe[1|2]:Y[:SCALe]:BOTTom <numeric_value>

Example: "DISP:TRAC:Y:BOTT -60dBm"

Features: *RST value: –

SCPI: conforming

DISPlay[:WINDow[1 to 4]]:TRACe[1|2]:Y[:SCALe]:TOP

This command defines the upper edge of the grid. In addition to the units given in the table, the