Specifications

DISPlay Subsystem ZVx
1043.0009.50 3.46 E-15
DISPlay:FORMat:EXPand
This command switches the expanded representation on or off.
Syntax:
DISPlay:FORMat:EXPand ON | OFF
Example:
"DISP:FORM:EXP ON"
Features:
*RST value:
SCPI:
OFF
device-specific
DISPlay:PROGram[:MODE]
This command switches the screen between the measuring instrument and the controller function.
Syntax:
DISPlay:PROGram:[MODE] ON | OFF
Example:
"DISP:PROG ON"
Features:
*RST value:
SCPI:
OFF
device-specific
DISPlay:PSAVe[:STATe]
This command switches the screen saver of the unit’s LCD display on or off.
Syntax:
DISPlay:PSAVe:[STATe] ON | OFF
Example:
"DISP:PSAV ON"
Characteristics:
*RST value:
SCPI:
OFF
device-specific
DISPlay:PSAVe:HOLDoff
This command sets the time after which the unit’s LCD display is switched off. The range is 1 to
100 minutes.
Syntax:
DISPlay:PSAVe:[STATe] <numeric_value>
Example:
"DISP:PSAV:HOLD 7"
Characteristics:
*RST value:
SCPI:
5
device-specific
DISPlay[:WINDow[1...4]]:DIAGram
This command selects the diagram type for representation.
Syntax:
DISPlay[:WINDow[1...4]]:DIAGram CLIN | CLOG | CDB | CSEG |PLIN | PLOG |
PDB | PSEG |CHARter | SMITh | ISMith
Example:
"DISP:DIAG SMIT
Features:
*RST value:
SCPI:
CLOG
device-specific
DISPlay[:WINDow[1...4]]:DIAGram:SEGMented:X[:STATe]
This command switches on and off the list sweep with a segmented x-axis.
Syntax:
DISPlay[:WINDow[1...4]]:DIAGram:SEGMented:X:[STATe] ON | OFF
Example:
"DISP:DIAG:SEGM:X ON"
Features:
*RST value:
SCPI:
OFF
device-specific