Specifications

ZVx DISPlay Subsystem
1043.0009.50 3.45 E-15
3.6.5 DISPlay Subsystem
The DISPLay subsystem controls the selection and presentation of textual and graphic information and
of trace data on the display.
The commands for TRACe1 refer to the active measured value memory, the commands for TRACe2 to
the memory trace.
COMMAND PARAMETER UNIT COMMENT
DISPlay
:FORMat
:EXPand
:PROgram
[:MODE]
:PSAVe
[:STATe]
:HOLDoff
[:WINDow<1...4>]
:DIAGram
:SEGMented
:X
[:STATe]
:R
:Y
:TRACe<1|2>
:X
:OFFSet
:SPACing
:Y
[:SCALe]
:AUTO
:RLEVel
:PDIVision
:RPOSition
:BOTTom
:TOP
:OFFSet
:SPACing
:R
[:SCALe]
:CPOint
:OEDGe
:SPACing
[:STATe]
SINGle | DOVerlay | QOVerlay |
DSPLit | QDSPlit | QQSPlit
<Boolean>
<Boolean>
<Boolean>
<numeric_value>
CLIN | CLOG | CDB | CSEG |
PLIN | PLOG | PDB | PSEG |
CHARter | SMITh | ISMith
<Boolean>
<numeric_value> ...
<numeric_value> ...
<numeric_value>
LINear | LOGarithmic
ONCE
<numeric_value>
<numeric_value>
<numeric_value>
<numeric_value>
<numeric_value>
<numeric_value>
LINear | LOGarithmic | DB
<numeric value>
<numeric value>
LINear | LOGarithmic | DB
<Boolean>
HZ
--
--
DBM|DB
DBM|DB
PCT
DBM|DB
DBM|DB
DBM|DB
--
DBM|DB
DBM|DB
--
no query
DISPlay:FORMat
This command switches the display format of the measurement results between one, two and four
diagrams.
Syntax: DISPlay:FORMat SINGle | DOVerlay | QOVerlay |
DSPLit | QDSPlit | QQSPlit
Example: "DISP:FORM DSPL"
Features: *RST value: SINGle
SCPI: device-specific