Specifications

DIAGnostic Subsystem ZVx
1043.0009.50 3.44 E-15
3.6.4 DIAGnostic Subsystem
The DIAGnostic subsystem contains the commands which support instrument diagnostics for
maintenance, service and repair. In accordance with the SCPI standard, all of these commands are
device-specific.
COMMAND PARAMETER UNIT COMMENT
DIAGnostic
:SERVice
:FUNCtion
:RFPower
<numeric_value>,<numeric_value>..
<Boolean>
no query
DIAGnostic:SERVice:FUNCtion
This command activates a service function.
Syntax: DIAGnostic:SERVice:FUNCtion <numeric_value>,<numeric_value>...
Example: "DIAG:SERV:FUNC 2,0,2,12,1"
Features: *RST value: -
SCPI: device-specific
The service function is selected via five parameters: functional group number, board number,
function number, parameter 1 and parameter 2.
See service manual
DIAGnostic:SERVice:RFPower
This command switches the stimulus signal on and off.
Syntax: DIAGnostic:SERVice:RFPower ON | OFF
Example: "DIAG:SERV:RFP OFF"
Features: *RST value: -
SCPI: device-specific