Specifications

ZVx CALCulate Subsystem
1043.0009.50 3.43 E-15
3.6.3.9 CALCulate:UNIT Subsystem
The CALCulate:UNIT - subsystem defines the physical units to be used for the measured values.
COMMAND PARAMETER UNIT COMMENT
CALCulate<1..4>
:UNIT
:POWer
:A1
:A2
:B1
:B2
MW | W | UV | MV | V |
DBM | DBW | DBUV | DBMV | DBV
MW | W | UV | MV | V |
DBM | DBW | DBUV | DBMV | DBV
MW | W | UV | MV | V |
DBM | DBW | DBUV | DBMV | DBV
MW | W | UV | MV | V |
DBM | DBW | DBUV | DBMV | DBV
CALCulate[1...4]:UNIT:POWer:A1|A2|B1|B2
This command defines the physical units for the direct measured wave quantities.
Syntax:
CALCulate[1...4]:UNIT:POWer:A1|A2|B1|B2 MW | W | UV | MV | V | DBM |
DBW | DBUV | DBMV | DBV
Example:
"CALC:UNIT:POW:A2 DBUV"
Features:
*RST value:
SCPI:
–
device-specific