Specifications

ZVx CALCulate Subsystem
1043.0009.50 3.41 E-15
CALCulate[1...4]:TRANsform:TIME:METHod
This command selects the transformation method (fast Fourier or chirp transformation) to be used.
Syntax:
CALCulate[1...4]:TRANsform:TIME:METHod FFT | CHIRp
Example:
"CALC:TRAN:TIME:METH FFT"
Features:
*RST-Wert:
SCPI:
CHIRp
device-specific
CALCulate[1...4]:TRANsform:TIME[:TYPE]
This command selects the time domain transformation mode (lowpass or bandpass).
Syntax:
CALCulate[1...4]:TRANsform:TIME:TYPE BPASs | LPASs
Example:
"CALC:TRAN:TIME LPAS"
Features:
*RST-Wert:
SCPI:
BPASs
conforming
CALCulate[1...4]:TRANsform:TIME:LPASs
This command defines the type of grid to be used in the lowpass mode.
Syntax:
CALCulate[1...4]:TRANsform:TIME:LPASs KFSTop | KDFRequency | MINStep
Example:
"CALC:TRAN:TIME:LPAS KFST"
Features:
*RST-Wert:
SCPI:
--
device-specific
CALCulate[1...4]:TRANsform:TIME:LPASs:DCSParam
This command sets the S-parameter at 0 Hz for a lowpass transformation.
Syntax:
CALCulate[1...4]:TRANsform:TIME:LPASs:DCSParam <numeric_value>
Example:
"CALC:TRAN:TIME:LPAS:DCSP 2"
Features:
*RST-Wert:
SCPI:
1
device-specific
CALCulate[1...4]:TRANsform:TIME:STIMulus
This command selects the type of input signal to be used for the time domain transformation.
Syntax:
CALCulate[1...4]:TRANsform:TIME:STIMulus IMPulse | STEP
Example:
"CALC:TRAN:TIME:STIMulus STEP"
Features:
*RST-Wert:
SCPI:
IMPulse
conforming
CALCulate[1...4]:TRANsform:TIME:STARt
This command defines the start time for the time domain transformation.
Syntax:
CALCulate[1...4]:TRANsform:TIME:STARt <numeric_value>
Example:
"CALC:TRAN:TIME:STARt 10ms"
Features:
*RST-Wert:
SCPI:
- 500 ps
conforming