Specifications

CALCulate Subsystem ZVx
1043.0009.50 3.36 E-15
CALCulate[1...4]:MARKer[1...8]:FUNCtion:PTPeak:STATe
This command switches the determination of the maximum and minimum measured value (peak-to-
peak value ) on or off.
Syntax:
CALCulate[1...4]:MARKer[1...8]:FUNCtion:PTPeak:STATe ON | OFF
Example:
"CALC:MARK:FUNC:PTP:STAT ON"
Features:
*RST value:
SCPI:
OFF
device-specific
CALCulate[1...4]:MARKer[1...8]:FUNCtion:PTPeak:RESult?
This command queries the result of the peak-to-peak value search.
Syntax:
CALCulate[1...4]:MARKer[1...8]:FUNCtion:PTPeak:RESult? [ALL]
Example:
"CALC:MARK:FUNC:PTP:RES?"
Features:
*RST value:
SCPI:
-
device-specific
This command is a query,, which is why it is not assigned an *RST value.
By default, the analyzer will return the peak-to-peak and the average value. If the optional parameter
ALL is specified the analyzer will return the peak-to-peak, average, minimum, maximum values and
the standard deviation.
CALCulate[1...4]:MARKer[1...8]:FUNCtion:CENTer
This command sets the center frequency to the current marker frequency.
Syntax: CALCulate[1...4]:MARKer[1...8]:FUNCtion:CENTer
Example: "CALC:MARK:FUNC:CENT"
Features: *RST value: _
SCPI: device-specific
This command is an "event",, which is why it is not assigned an *RST value and has no query.
CALCulate[1...4]:MARKer[1...8]:FUNCtion:STARt
This command sets the start frequency to the frequency of the specified marker.
Syntax: CALCulate[1...4]:MARKer[1...8]:FUNCtion:STARt
Example: "CALC:MARK:FUNC:STAR"
Features: *RST value: -
SCPI: device-specific
This command is an "event",, which is why it is not assigned an *RST value and has no query.
CALCulate[1...4]:MARKer[1...8]:FUNCtion:STOP
This command sets the stop frequency to the frequency of the specified marker.
Syntax: CALCulate[1...4]:MARKer[1...8]:FUNCtion:STOP
Example: "CALC:MARK:FUNC:STOP"
Features: *RST value: -
SCPI: device-specific
This command is an "event",, which is why it is not assigned an *RST value and has no query.