Specifications

ZVx CALCulate Subsystem
1043.0009.50 3.35 E-15
CALCulate[1...4]:MARKer[1...8]:FUNCtion:EDELay:VALue?
This command queries the value of the electrical or the mechanical length or the phase delay.
The format of the return value must be selected beforehand with CALC:MARK:FUNC:EDEL.
The suffix of MARKer has no meaning.
Syntax:
CALCulate[1...4]:MARKer[1...8]:FUNCtion:EDELay:VALue?
Example:
"CALC:MARK:FUNC:EDEL:VAL?"
Features:
*RST value:
SCPI:
--
device-specific
This command is a query only and therefore has no *RST value.
CALCulate[1...4]:MARKer[1...8]:FUNCtion:DELTa:STATe
This command switches the delta marker mode on or off.
Syntax:
CALCulate[1...4]:MARKer[1...8]:FUNCtion:DELTa:STATe ON | OFF
Example:
"CALC:MARK:FUNC:DELT:STAT ON"
Features:
*RST value:
SCPI:
OFF
device-specific
CALCulate[1...4]:MARKer[1...8]:FUNCtion:DELTa:REFerence
This command defines the reference marker for the delta marker mode.
Syntax:
CALCulate[1...4]:MARKer[1...8]:FUNCtion
:DELTa:REFerence
MARKER1 | MARKER2 |
MARKER3 | MARKER4 |
MARKER5 | MARKER6 |
MARKER7 | MARKER8 |
FIXed
Example:
"CALC:MARK:FUNC:DELT:REF MARKER1"
Features:
*RST value:
SCPI:
–
device-specific
CALCulate[1...4]:MARKer[1...8]:FUNCtion:DELTa:REFerence:RPOSition[:CARTesian]
This command defines the reference value for the delta marker mode “FIXED” in Cartesian
diagrams.
Syntax:
CALCulate[1...4]:MARKer[1...8]:FUNCtion
:DELTa:REFerence:RPOSition[:CARTesian] <numeric_value>
Example:
"CALC:MARK:FUNC:DELT:REF:RPOS 1"
Features:
*RST value:
SCPI:
–
device-specific
CALCulate[1...4]:MARKer[1...8]:FUNCtion:DELTa:REFerence:RPOSition:POLar
This command defines the reference value for the delta marker mode “FIXED” in polar diagrams.
Syntax:
CALCulate[1...4]:MARKer[1...8]:FUNCtion
:DELTa:REFerence:RPOSition:POLar
<numeric_value>,
<numeric_value>
Example:
"CALC:MARK:FUNC:DELT:REF:RPOS:POL 1,2"
Features:
*RST value:
SCPI:
-
device-specific