Specifications

ZVx CALCulate Subsystem
1043.0009.50 3.33 E-15
CALCulate[1...4]:MARKer[1...8]:MAXimum
This command triggers the search for the maximum of the trace for the active marker.
Syntax:
CALCulate[1...4]:MARKer[1...8]:MAXimum
Example:
"CALC:MARK:MAX"
Features:
*RST value:
SCPI:
–
device-specific
This command is an event,, which is why it is not assigned an *RST-value and has no query.
CALCulate[1...4]:MARKer[1...8]:MINimum
This command triggers the search for the minimum of the trace for the active marker.
Syntax:
CALCulate[1...4]:MARKer[1...8]:MINimum
Example:
"CALC:MARK:MIN"
Features:
*RST value:
SCPI:
–
device-specific
This command is an event,, which is why it is not assigned an *RST-value and has no query.
CALCulate[1...4]:MARKer[1...8]:FUNCtion[:SELect]
This command selects the marker search function.
Syntax:
CALCulate[1...4]:MARKer[1...8]:FUNCtion[:SELect] MAXimum | MINimum |
TARGet | BFILter
Example:
"CALC:MARK:FUNC TARG"
Features:
*RST value:
SCPI:
–
device-specific
CALCulate[1...4]:MARKer[1...8]:FUNCtion:BWIDth
This command defines the difference of the bandwidth points which are searched starting from an
extreme value (e.g. the 3dB-bandwidth).
Syntax:
CALCulate[1...4]:MARKer[1...8]:FUNCtion:BWIDth <numeric_value>
Example:
"CALC:MARK:FUNC:BWID 6dB"
Features:
*RST value:
SCPI:
-
device-specific
CALCulate[1...4]:MARKer[1...8]:FUNCtion:BWIDth:MODE
This command selects the filter type (bandpass or bandstop) for the search of the bandwidth.
Syntax:
CALCulate[1...4]:MARKer[1...8]:FUNCtion:BWIDth:MODE BPASs | BSTOp
Example:
"CALC:MARK:FUNC:BWID:MODE BSTOP"
Features:
*RST value:
SCPI:
-
device-specific