Specifications

CALCulate Subsystem ZVx
1043.0009.50 3.32 E-15
CALCulate[1...4]:MARKer[1...8]:SEARch[:IMMediate]
This command triggers a search for absolute extreme values for the active marker.
Syntax:
CALCulate[1...4]:MARKer[1...8]:SEARch[:IMMediate]
Example:
"CALC:MARK:SEAR"
Features:
*RST value:
SCPI:
-
device-specific
This command is an event,, which is why it is not assigned an *RST-value and has no query.
CALCulate[1...4]:MARKer[1...8]:SEARch:NEXT
This command triggers the search for the next local extreme value for the active marker.
Syntax:
CALCulate[1...4]:MARKer[1...8]:SEARch:NEXT
Example:
"CALC:MARK:SEAR:NEXT"
Features:
*RST value:
SCPI:
-
device-specific
This command is an event,, which is why it is not assigned an *RST-value and has no query.
CALCulate[1...4]:MARKer[1...8]:SEARch:RIGHt
This command triggers the search for the next target point with a larger stimulus value for the active
marker.
Syntax:
CALCulate[1...4]:MARKer[1...8]:SEARch:RIGHt
Example:
"CALC:MARK:SEAR:RIGH"
Features:
*RST value:
SCPI:
-
device-specific
This command is an event,, which is why it is not assigned an *RST-value and has no query.
CALCulate[1...4]:MARKer[1...8]:SEARch:LEFT
This command triggers the search for the next target point with a smaller stimulus value for the
active marker.
Syntax:
CALCulate[1...4]:MARKer[1...8]:SEARch:LEFT
Example:
"CALC:MARK:SEAR:LEFT"
Features:
*RST value:
SCPI:
-
device-specific
This command is an event,, which is why it is not assigned an *RST-value and has no query.
CALCulate[1...4]:MARKer[1...8]:SEARch:TRACking
This command switches the permanent (i. e. renewed after each sweep) search for extreme values
on and off.
Syntax:
CALCulate[1...4]:MARKer[1...8]:SEARch:TRACking ON | OFF
Example:
"CALC:MARK:SEAR:TRACK ON"
Features:
*RST value:
SCPI:
OFF
device-specific