Specifications

ZVx CALCulate Subsystem
1043.0009.50 3.31 E-15
CALCulate[1 to 4]:MARKer[1 to 8]:X
This command positions the selected marker to the indicated stimulus value. If the marker is a delta
marker, the position can be specified either absolutely, or relative relation to the reference marker.
Syntax: CALCulate[1 to 4]:MARKer[1 to 8]:X <numeric value>
<numeric value> ::= 0 to MAX (frequency) | MAX (sweep time)
Example: "CALC:MARK:X 10.7MHz"
Features: *RST value: -
SCPI: device-specific
CALCulate[1 to 4]:MARKer[1 to 8]:Y?
This command queries the selected marker value. If the selected marker is a delta marker the query
returns the difference to the reference marker.
Syntax: CALCulate[1 to 4]:MARKer[1 to 8]:Y?
Example: "CALC:MARK:Y?"
Features: *RST value: -
SCPI: device-specific
CALCulate[1...4]:MARKer[1...8]:FORMat
This command defines the formatting of the marker value.
Syntax:
CALCulate[1...4]:MARKer[1...8]:FORMat MLINear | MDB | PHASe |
REAL | IMAGinary | SWR |
GDELay | MLPHase | MDPHase |
COMPlex | L | C | RLC
Example:
"CALC:MARK:FORM MLIN"
Features:
*RST value:
SCPI:
-
device-specific
CALCulate[1...4]:MARKer[1...8]:TRANsform:COMPlex
This command defines the conversion of the marker value.
Syntax:
CALCulate[1...4]:MARKer[1...8]:TRANsform:COMPlex S | SINV | Z | ZREL | Y
| YREL
Example:
"CALC:MARK:TRAN:COMP SINV"
Features:
*RST value:
SCPI: device-specific
CALCulate[1...4]:MARKer[1...8]:TRACe
This command changes the marker between the active and the memory trace.
Syntax:
CALCulate[1...4]:MARKer[1...8]:TRACe CHDATA | CHMEM
Example:
"CALC:MARK:TRAC CHMEM"
Features:
*RST value:
SCPI:
-
device-specific