Specifications

CALCulate Subsystem ZVx
1043.0009.50 3.30 E-15
CALCulate[1 to 4]:MARKer[1 to 8][:STATe]
This command switches on or off the selected marker (1 to 8). If no indication is made, marker 1 is
selected automatically.
Syntax: CALCulate[1 to 4]:MARKer[1 to 8][:STATe] ON | OFF
Example: "CALC:MARK3 ON"
Features: *RST value: OFF
SCPI: device-specific
CALCulate[1 to 4]:MARKer[1 to 8]:AOFF
This command switches off all active markers.
Syntax: CALCulate[1 to 4]:MARKer[1 to 8]:AOFF
Example: "CALC:MARK:AOFF"
Features: *RST value: -
SCPI: device-specific
This command is an event,, which is why it is not assigned an *RST value and has no query.
CALCulate[1 to 4]:MARKer[1 to 8]:MODE
This command switches over between mode continuous and discrete for the selected marker.
Syntax: CALCulate[1 to 4]:MARKer[1 to 8]MODE CONTinuous | DISCrete
Example: "CALC:MARK3:MODE DISC"
Features: *RST value: CONTinuous
SCPI: device-specific
CALCulate[1...4]:MARKer[1...8]:COUPled[:STATe]
This command couples/decouples the markers. It is valid for all markers; the CALC and MARK
suffixes have no influence.
Syntax:
CALCulate[1...4]:MARKer[1...8]:COUPled[:STATe] ON | OFF
Example:
"CALC:MARK:COUP ON"
Features:
*RST value:
SCPI:
OFF
device-specific
CALCulate[1...4]:MARKer[1...8]:X:MODE
This command switches over between absolute and relative positioning in relation to the reference
marker when delta markers are used.
Syntax:
CALCulate[1...4]:MARKer[1...8]:X:MODE ABS | REL
Example:
"CALC:MARK:X:MODE REL"
Features:
*RST value:
SCPI:
ABS
device-specific