Specifications

ZVx CALCulate Subsystem
1043.0009.50 3.27 E-15
CALCulate[1...4]:LIMit[1...8]:UPPer:STATe
This command switches on and off the limit check with an upper limit line.
Syntax:
CALCulate[1...4]:LIMit[1...8]:UPPer:STATe ON | OFF
Example:
"CALC:LIM:UPPer:STAT ON"
Features:
*RST value:
SCPI:
-
conforming
The result of the limit check can be queried with the command CALCulate:LIMit<1...8>:FAIL?
CALCulate[1...4]:LIMit[1...8]:UPPer:RADius
This command defines the radius of the limit line in a circle diagram.
Syntax:
CALCulate[1...4]:LIMit[1...8]:UPPer:STATe ON | OFF
Example:
"CALC:LIM:UPPer:RAD "
Features:
*RST value:
SCPI:
-
device-specific
CALCulate[1...4]:LIMit[1...8]:LOWer[:DATA]
This command defines the values of the lower limit lines.
Syntax:
CALCulate[1...4]:LIMit[1...8]:LOWer[:DATA] <numeric_value>,
<numeric_value>..
Example:
"CALC:LIM:LOW -40,-30,-30,-40"
Features:
*RST value:
SCPI:
-
conforming
CALCulate[1...4]:LIMit[1...8]:LOWer:SHIFt
This command shifts the tolerance band along the y-axis direction.
Syntax:
CALCulate[1...4]:LIMit[1...8]:LOWer:SHIFt <numeric_value>
Example:
"CALC:LIM:LOWer:SHIFt 3dB"
Features:
*RST value:
SCPI:
-
Gerätespezifisch
The UPPer limit is shifted together with the LOWer limit by the same distance.
CALCulate[1...4]:LIMit[1...8]:LOWer:STATe
This command switches on and off the limit test with a lower limit line.
Syntax:
CALCulate[1...4]:LIMit[1...8]:LOWer:STATe ON | OFF
Example:
"CALC:LIM:STAT ON"
Features:
*RST value:
SCPI:
OFF
device-specific