Specifications
ZVx CALCulate Subsystem
1043.0009.50 3.25 E-15
CALCulate[1...4]:LIMit[1...8]: RDOMain:COMPlex
This command defines the complex conversion of the measured value belonging to the limit line.
Syntax:
CALCulate[1...4]:LIMit[1...8]: RDOMain:COMPlex S | SINV | Y | Z | YREL |
ZREL
Example:
"CALC:LIM:RDOM:COMP Y"
Features:
*RST value:
SCPI:
–
device-specific
CALCulate[1...4]:LIMit[1...8]: RDOMain:FORMat
This command defines the formatting of the measured value belonging to the limit line.
Syntax:
CALCulate[1...4]:LIMit[1...8]: RDOMain:FORMat COMPlex | MAGNitude |
PHASe | REAL | IMAGinary |
SWR | GDELay
Example:
"CALC:LIM:RDOM:FORM REAL"
Features:
*RST value:
SCPI:
COMPlex
device-specific
CALCulate[1...4]:LIMit[1...8]: RDOMain:SPACing
This command defines the scaling of the axis belonging to the limit line. For Smith, inverted Smith
and charter diagrams, SIC must be specified.
Syntax:
CALCulate[1...4]:LIMit[1...8]: RDOMain:SPACing LINear | LOGarithmic | DB |
SIC
Example:
"CALC:LIM:RDOM:SPAC LOG"
Features:
*RST value:
SCPI:
LINear
device-specific
CALCulate[1...4]:LIMit[1...8]:CONTrol[:DATA]
This command defines the x-axis values of the limit line.
Syntax:
CALCulate[1...4]:LIMit[1...8]:CONTrol[:DATA] <numeric_value>,
<numeric_value>..
Example:
"CALC:LIM:CONT 1MHz,30MHz,300MHz,1GHz"
Features:
*RST value:
SCPI:
-
conforming
CALCulate[1...4]:LIMit[1...8]:CONTrol:DOMain
This command defines the x-axis representation in the frequency (F), time (T) and level (P) domains.
Syntax:
CALCulate[1...4]:LIMit[1...8]:CONTrol:DOMain FLIN | FLOG | FSEG | FSINgle
| TLIN | TLOG | PLIN |PLOG |
PSINgle
Example:
"CALC:LIM:CONT:DOM FLOG"
Features:
*RST value:
SCPI:
FLIN
device-specific