Specifications

CALCulate Subsystem ZVx
1043.0009.50 3.24 E-15
3.6.3.4 CALCulate:LIMit Subsystem
The CALCulate:LIMit subsystem comprises the limit lines and the corresponding limit checks.
COMMAND PARAMETER UNIT COMMENT
CALCulate<1..4>
:LIMit<1...8>
:STATe
:RDOMain
:COMPlex
:FORMat
:SPACing
:CONTrol
[:DATA]
:DOMain
:SHIFt
:CENTer
:SHIFt
:UPPer
[:DATA]
:SHIFt
:STATe
:RADius
:LOWer
[:DATA]
:SHIFt
:STATe
:FAIL?
:CLEar
[:IMMediate]
<Boolean>
S | SINV | Y | Z | YREL | ZREL
COMPlex | MAGNitude | PHASe |
REAL | IMAGinary | SWR |
GDELay | L | C
LINear | LOGarithmic | DB | SIC
<numeric_value>,<numeric_value>..
FLIN | FLOG | FSEG | FSINgle |
TLIN | TLOG |
PLIN | PLOG | PSINgle
<numeric_value>
<numeric_value>,<numeric_value>
<numeric_value>,<numeric_value>
<numeric_value>,<numeric_value>..
<numeric_value>
<Boolean>
<numeric_value>
<numeric_value>,<numeric_value>..
<numeric_value>
<Boolean>
--
--
--
HZ | S | DBM
HZ | S | DB
DB | OHM |
SIE | UNIT
UNIT
DB | DEG | S |
H | F | OHM |
SIE | UNIT
DB | DEG | S |
H | F | OHM |
SIE | UNIT
--
DB | OHM |
SIE | UNIT
DB | DEG | S |
H | F | OHM |
SIE | UNIT
DB | DEG | S |
H | F | OHM |
SIE | UNIT
--
--
--
no query
no query
valid for UPPer and LOWer
no query
valid for UPPer and LOWer
no query
query only
no query
CALCulate[1...4]:LIMit[1...8]:STATe
This command switches on and off the limit check..
Syntax:
CALCulate[1...4]:LIMit[1...8]:STATe ON | OFF
Example:
"CALC:LIM:STAT ON"
Features:
*RST value:
SCPI:
OFF
conforming