Specifications

ZVx CALCulate Subsystem

1043.0009.50 3.23 E-15

3.6.3.3 CALCulate:GDAPerture Subsystem

The CALCulate:GDAPerture - subsystem defines the parameters for the group delay and the aperture.

COMMAND PARAMETER UNIT COMMENT

CALCulate<1..4>

GDAPerture

:MODE

[:SPAN]

:SCOunt

STEP | FREQuency

<numeric_value>

CALCulate[1...4]:GDAPerture:MODE

This command switches between the aperture defined as a number of points (STEP) or as a fixed

frequency value..

Syntax: CALCulate[1...4]:GDAPerture:MODE

Example: "CALC:GDAP:MODE STEP"

Features: *RST value: STEP

SCPI: device-specific

CALCulate[1...4]:GDAPerture[:SPAN]

This command defines the aperture as a fixed frequency value..

Syntax: CALCulate[1...4]:GDAPerture[:SPAN] <numeric_value>

Example: "CALC:GDAP 0.5"

Features: *RST value: -

SCPI: conforming

CALCulate[1...4]:GDAPerture:SCOunt

This command defines the aperture as a number of points..

Syntax: CALCulate[1...4]:GDAPerture:SCOunt <numeric_value>

Example: "CALC:GDAP:SCO 12"

Features: *RST value: 10

SCPI: device-specific