Specifications

CALCulate Subsystem ZVx
1043.0009.50 3.20 E-15
3.6.3 CALCulate Subsystem
The CALCulate subsystem contains commands for converting instrument data, transforming and
carrying out corrections. These functions are carried out subsequent to data acquisition, i.e., following
the SENSe subsystem.
CALCulate1...4 selects the corresponding channel CH1...CH4.
3.6.3.1 CALCulate:FILTer - Subsystem
The CALCulate:FILTer subsystem defines how filter functions are applied to the measured data sets.
COMMAND PARAMETER UNIT COMMENT
CALCulate<1..4>
:FILTer
[:GATE]
:TIME
:STATe
:STARt
:STOP
:SPAN
:CENTer
:WINDow
:DCHebyshev
<Boolean>
<numeric_value>
<numeric_value>
<numeric_value>
<numeric_value>
RECT | HAMMing | HANNing |
BOHMan | DCHebyshev
<numeric_value>
s | m
s | m
s | m
s | m
dB
CALCulate[1...4]:FILTer[:GATE]:TIME:STATe
This command switches on and off the time domain gate.
Syntax:
CALCulate[1...4]:FILTer[:GATE]:TIME:STATe ON | OFF
Example:
"CALC:FILT:TIME:STATe ON"
Features:
*RST-Wert:
SCPI:
OFF
conforming
CALCulate[1...4]:FILTer[:GATE]:TIME:STARt
This command defines the start time for the gate.
Syntax:
CALCulate[1...4]:FILTer[:GATE]:TIME:STARt <numeric_value>
Example:
"CALC:FILT:TIME:STARt 10ms"
Features:
*RST-Wert:
SCPI:
- 500 ps
conforming
CALCulate[1...4]:FILTer[:GATE]:TIME:STOP
This command defines the stop time for the gate.
Syntax:
CALCulate[1...4]:FILTer[:GATE]:TIME:STOP <numeric_value>
Example:
"CALC:FILT:TIME:STARt 60ms"
Features:
*RST-Wert:
SCPI:
+ 500 ps
conforming