Specifications

1127.8600.01-2- CE E-2
EC Certificate of Conformity
Certificate No.: 2000-05, page 2
This is to certify that:
Equipment type Stock No. Designation
ZVK-B21 1128.1409.11 Attenuator for Generator Port 1
ZVK-B22 1128.1409.21 Attenuator for Generator Port 2
ZVK-B23 1128.1409.12 Attenuator for Receiver Port 1
ZVK-B24 1128.1409.22 Attenuator for Receiver Port 2
ZVM-B21 1128.1009.11 Attenuator for Generator Port 1
ZVM-B22 1128.1009.21 Attenuator for Generator Port 2
ZVM-B23 1128.1009.12 Attenuator for Receiver Port 1
ZVM-B24 1128.1009.22 Attenuator for Receiver Port 2
ZVR-B1 1044.0625.02 Autokal, Automatic Calibration System
ZVR-B2 1044.1009.02 Time Domain
ZVR-B8 1086.0000.02 3-Port Adapter
ZVR-B10 1106.6495.xx Increased Output Power at Port 1
ZVR-B14 1106.7510.02/.03 4-Port Adapter
ZVR-B21 1044.0025.11 Attenuator for Generator Port 1
ZVR-B22 1044.0025.21 Attenuator for Generator Port 2
ZVR-B23 1044.0025.12/.31 Attenuator for Receiver Port 1
ZVR-B24 1044.0025.22/.42 Attenuator for Receiver Port 2
ZVR-B26 1106.8600.07 Extra Inputs 4 Port
FSE-B16 1073.5973.02/.03 Ethernet Interface
FSE-B17 1066.4017.02 Second IEC BUS Interface
complies with the provisions of the Directive of the Council of the European Union on the
approximation of the laws of the Member States
- relating to electrical equipment for use within defined voltage limits
(73/23/EEC revised by 93/68/EEC)
- relating to electromagnetic compatibility
(89/336/EEC revised by 91/263/EEC, 92/31/EEC, 93/68/EEC)
Conformity is proven by compliance with the following standards:
EN61010-1 : 1993 + A2 : 1995
EN55011 : 1998 + A1 : 1999, Klasse B
EN61000-3-2 : 1995 + A1 : 1998 + A2 : 1998 + A14 : 2000
EN61000-3-3 : 1995
EN50082-2 : 1995
Affixing the EC conformity mark as from 2000
ROHDE & SCHWARZ GmbH & Co. KG
Mühldorfstr. 15, D-81671 München
Munich, 2001-01-30 Central Quality Management FS-QZ / Becker