Specifications
ZVx Test Procedure (ZVM & ZVK)
1127.8500.60 5.11 E-2
5.2.2.3 Noise Level
Test equipment: MATCH female from Calibration Kit ZV-Z32 (ZVM) or ZV-Z34 (ZVK)
Calibration:
½ PRESET
½ SOURCE Level –20 dBm
½ Terminate Port 1 and Port 2 with match from ZV-Z32 or ZV-Z34.
½ MEAS : INPUT b1, DRIVE PORT 2 or INPUT b2, DRIVE PORT1
½ Set all receiver step attenuators to 0 dB
½ IF bandwidth 10 Hz : AVG IF BW: 10 Hz
Measurement:
Settings on network analyzer:
MARKER MARKER CONT
MARKER Marker frequency = measurement frequency