Specifications

ZVx Test Sequence (R&S ZVC, R&S ZVCE)

1043.0009.50 5.51 E-7

Measurement:



Set test frequencies according to test report.

 Read marker value on the network analyzer taking the SOURCE POWER

(-10 dB) into account.

ermissible noise values:

Model 50, 60 Model 51, 52, 61, 62

20 kHz to 200 kHz  -70 dBm  -64 dBm

200 kHz to 20 MHz  -90 dBm  -84 dBm

20 MHz to 3 GHz  -100 dBm  -94 dBm

3 GHz to 4 GHz  -90 dBm  -84 dBm

4 GHz to 8 GHz  -80 dBm  -74 dBm

5.5.2.4 Matching Input b1 and Input b2

(Only with Option R&S ZVR-B25, External Measurements)

Test equipment,

test set 50 :

Power Splitter RVZ, Calibration Kit ZV-Z21, Test Port Cable pair ZV-Z11

Test setup:

ZVC

External On

THRU

Kabel

RVZ

Block diagram for measuring the matching of input b1. For measurement of input b2,

the connections from RVZ to Input b1/b2 are reversed.

Settings at the network analyzer:

MODE EXTERNAL

SWEEP LOG SWEEP

CENTER Test frequency

MEAS S11/S22

MARKER = Measured frequency