Specifications

Test Sequence (R&S ZVR, R&S ZVRE, R&S ZVRL) ZVx
1043.0009.50 5.10 E-7
Measurement:

Set test frequencies and levels according to test report, report measurement
results and subtract the reference values.
D
eviation from
reference value (-10 dBm): Permissible deviation:
20 kHz to 200 kHz +10 dB to +3 dB <1 dB
+ 3 dB .to -15 dB <0.2 dB
 200 kHz +10 dB to +3 dB <1 dB
+ 3 dB to -5 dB <0.2 dB
- 5 dB to -60 dB <0.05 dB
5.2.2.3 Noise Level
Test equipment:
Test cable ZV-Z11 (ZV-Z12 for 75  test set) MATCH from calibration kit ZV-Z21
(ZCAN for 75  test set).
Calibration:  Connect PORT1 to PORT2 via test cable.
 MEAS : INPUT b1, INPUT b2
 TRACE : DATA TO MEMORY : SHOW MATH
Test setup:  MATCH at PORT1 or PORT2.
Settings at the network analyzer:
PRESET
SOURCE POWER -25 dBm
MEAS INPUT b1, INPUT b2
AVG SWEEP AVG 10
MARKER MARKER CONT
MARKER Marker frequency = test frequency
Measurement:
 Set test frequencies according to test report.
 Read marker value on the network analyzer taking the SOURCE POWER into
account (–10 dB for 50  test set, –4 dB for 75  test set).
Permissible noise values:
Test set 50 , passive Test set 75 , passive
9 kHz to 200 kHz  -65 dBm  -50 dBm
200 kHz to 20 MHz  -85 dBm  -70 dBm
20 MHz to 3 GHz  -95 dBm  -80 dBm
3 GHz to 4 GHz  -85 dBm  -80 dBm
Test set 50 , active Test set 75 , active
300 kHz to 1 MHz  -82 dBm  -70 dBm
1 MHz to 20 MHz  -85 dBm  -80 dBm
20 MHz to 3 GHz  -95 dBm  -75 dBm
3 GHz to 4 GHz  -85 dBm  -75 dBm