Specifications

ZVx Test Sequence (R&S ZVR, R&S ZVRE, R&S ZVRL)

1043.0009.50 5.7 E-7

Measurement:



Set test frequencies and levels according to test report, read the level on the

power meter.

Permissible deviations referred to the value at -10 dBm (+3 dBm at PORT 1 with Opt.

R&S ZVR-B10):

f = 40 kHz to 4 GHz

10 to –5 dB < 0.4 dB

–5 dB to –15 dB < 0.6 dB

5.2.1.7.1 Matching to Output a1

(Only with option R&S ZVR-B25, External Measurements)

Test equipment: Signal generator SME 06, Spectrum Analyzer FSB, VSWR–bridge ZRC

Test setup:

ZVRx

Port 1 Port 2

SME 06 FSB

ZRC

Settings at the network analyzer:

SWEEP SINGLE POINT

CENTER Test frequency + f

SWEEP TIME 500 s

SOURCE POWER –10 dB

MODE EXTERNAL

Reference

measurement:

 Use FSB to record measured values with open circuit and short circuit at the test

port of the SWR bridge and take the average.

Measurement:

Test frequency (FSB): f: Return loss:

400 kHz

to 4000 MHz – 100 kHz > 8 dB