Specifications

ZVx TRIGger-Subsystem
1043.0009.50 3.145 E-15
TRIGger[:SEQuence]:HOLDoff
This command defines the length of the trigger delay.
Syntax:
TRIGger[:SEQuence]:HOLDoff <numeric value>
<numeric_value> ::= 0...100s.
Example:
"TRIG:HOLD 500us"
Features:
*RST value:
SCPI:
0s
conforming
TRIGger[:SEQuence]:SLOPe
This command selects the edge of the trigger signal.
Syntax:
TRIGger[:SEQuence]:SLOPe POSitive | NEGative
Example:
"TRIG:SLOP NEG"
Features:
*RST value:
SCPI:
POSitive
conforming
TRIGger[:SEQuence]:LINK
This command selects whether the triggered measurement will be a single point measurement or a
sweep.
Syntax:
TRIGger[:SEQuence]:LINK <string>
<string> ::= ’POINT’
’SWEEP’
Example:
"TRIG:LINK ’POINT’"
Features:
*RST value:
SCPI:
’SWEEP’
conforming