Specifications

TRACe Subsystem ZVx
1043.0009.50 3.142 E-15
TRACe[:DATA][:RESPonse]:BODY?
This query command reads the response values of the trace data from the device. With binary data
transmission, these are only the useful data without the SCPI block data header.
Syntax:
TRACe[:DATA][:RESPonse]:BODY? CH1DATA | CH2DATA | CH3DATA |
CH4DATA | CH1MEM | CH2MEM |
CH3MEM | CH4MEM | MDATA1 |
MDATA2 | MDATA3 | MDATA4 | MDATA5
| MDATA6 | MDATA7 | MDATA8
Example:
"TRAC:BODY? CH1DATA"
Characteristics:
*RST value:
SCPI:
–
device-specific
TRACe[:DATA]:STIMulus[:ALL]?
This query reads the stimulus values of the trace data from the instrument. Binary data are
transferred as SCPI block data.
Syntax:
TRACe[:DATA]:STIMulus
[:ALL]?
CH1DATA | CH2DATA | CH3DATA |
CH4DATA | CH1MEM | CH2MEM | CH3MEM |
CH4MEM | MDATA1 | MDATA2 | MDATA3 |
MDATA4 | MDATA5 | MDATA6 | MDATA7 |
MDATA8
Example:
"TRAC:STIM? CH1DATA"
Features:
*RST value:
SCPI:
–
device-specific
TRACe[:DATA]:STIMulus:PREamble?
This query command reads the preamble of the stimulus values of the trace data from the device.
With binary data transmission (setting: FORMat[:DATA] REAL, 32 or FORMat[:DATA] REAL,
64), this is the length of the useful data in bytes. With ASCII data transmission (setting:
FORMat[:DATA] ASCii), “0“ is returned.
Syntax:
TRACe[:DATA]:STIMulus:PREamble? CH1DATA | CH2DATA | CH3DATA |
CH4DATA | CH1MEM | CH2MEM |
CH3MEM | CH4MEM | MDATA1 |
MDATA2 | MDATA3 | MDATA4 |
MDATA5 | MDATA6 | MDATA7 |
MDATA8
Example:
"TRAC:STIM:PRE? CH1DATA"
Characteristics:
*RST value:
SCPI:
–
device-specific
TRACe[:DATA]:STIMulus:BODY?
This query command reads the stimulus values of the trace data from the device. With binary data
transmission, these are only the useful data without the SCPI block data header.
Syntax:
TRACe[:DATA]:STIMulus:BODY? CH1DATA | CH2DATA | CH3DATA |
CH4DATA | CH1MEM | CH2MEM |
CH3MEM | CH4MEM | MDATA1 | MDATA2
| MDATA3 | MDATA4 | MDATA5 | MDATA6
| MDATA7 | MDATA8
Example:
"TRAC:STIM:BODY? CH1DATA"
Characteristics:
*RST value:
SCPI:
–
device-specific