Specifications

SYSTem Subsystem ZVx
1043.0009.50 3.138 E-15
SYSTem:ERRor[:NEXT]?
This command queries and at the same time deletes the oldest entry in the error queue.
Syntax: SYSTem:ERRor?
Example: "SYST:ERR?"
Features: *RST value: –
SCPI: conforming
Positive error numbers indicate device-specific errors, negative error numbers are error messages
defined by SCPI (cf. Appendix B). If the error queue is empty, the error number 0, "no error", is
returned. This command is identical with the command STATus:QUEue:NEXT?. This command is a
query, which is why it is not assigned an *RST value.
SYSTem:ERRor:ALL?
This command queries and at the same time deletes all entries in the error queue.
Syntax:
SYSTem:ERRor:ALL?
Beispiel:
"SYST:ERR:ALL?"
Eigenschaften:
*RST-Wert:
SCPI:
-
konform
Positive error numbers indicate device-specific errors, negative error numbers are error messages
defined by SCPI (cf. Appendix B). If the error queue is empty, the error number 0, "no error", is
returned. This command is a query, which is why it is not assigned an *RST value.
SYSTem:FIRMware:UPDate
This command starts a firmware update with the data set from the indicated directory.
Syntax:
SYSTem:FIRMware:UPDate <string>
Example:
"SYST:FIRM:UPD ‘C:\V4.32’"
Features:
*RST value:
SCPI:
-
device-specific
SYSTem:PASSword[:CENable]
This command gives access to the service functions upon entry of the password.
Syntax:
SYSTem:PASSword[:CENable] password
Example:
"SYST:PASS 'XXXX'"
Features:
*RST value:
SCPI:
-
conforming
The command has no query.