Specifications

STATus Subsystem ZVx
1043.0009.50 3.128 E-15
STATus:QUEStionable:POWer[:EVENt?]
This command queries the contents of the EVENt section of the STATus:QUEStionable:POWer-
register.
Syntax:
STATus:QUEStionable:POWer[:EVENt?]
Example:
"STAT:QUES:POW?"
Characteristics:
*RST value:
SCPI:
–
device-specific
The contents of the EVENt section are cleared on reading out.
STATus:QUEStionable:POWer:CONDition?
This command queries the CONDition section of the STATus:QUEStionable:POWer register.
Syntax:
STATus:QUEStionable:POWer:CONDition?
Example:
"STAT:QUES:POW:COND?"
Characteristics:
*RST value:
SCPI:
–
device-specific
STATus:QUEStionable:POWer:ENABle
This command sets the bits of the ENABle section of the STATus:QUEStionable:POWer register.
Syntax:
STATus:
QUEStionable:POWer:ENABle
0 to 65535
Example:
"STAT:QUES:POW:ENAB 65535"
Characteristics:
*RST value:
SCPI:
–
device-specific
The ENABle register enables the events of the corresponding EVENt section selectively for the sum
bit in the status byte.
STATus:QUEStionable:POWer:PTRansition
This command sets the edge detectors of all bits of the STATus:QUEStionable:POWer register for
the transitions of the CONDition bit from 0 to 1.
Syntax:
STATus: QUEStionable:POWer:PTRansition 0 to 65535
Example:
"STAT:QUES:POW:PTR 65535"
Characteristics:
*RST value:
SCPI:
–
device-specific
STATus:QUEStionable:POWer:NTRansition
This command sets the edge detectors of all bits of the STATus:QUEStionable:POWer register for
the transitions of the CONDition bit from 1 to 0.
Syntax:
STATus: QUEStionable:POWer:NTRansition 0 to 65535
Example:
"STAT:QUES:POW:NTR 65535"
Characteristics:
*RST value:
SCPI:
–
device-specific