Specifications

ZVx STATus Subsystem
1043.0009.50 3.125 E-15
STATus:QUEStionable[:EVENt?]
This command queries the contents of the EVENt section of the STATus:QUEStionable register.
Syntax: STATus:QUEStionable[:EVENt?]
Example: "STAT:QUES?"
Features: *RST value: –
SCPI: conforming
Readout deletes the contents of the EVENt section.
STATus:QUEStionable:CONDition?
This command queries the CONDition section of the STATus:QUEStionable register.
Syntax: STATus:QUEStionable:CONDition?
Example: "STAT:QUES:COND?"
Features: *RST value: –
SCPI: conforming
Readout does not delete the contents of the CONDition section.
STATus:QUEStionable:ENABle
This command sets the bits of the ENABle section of the STATus-QUEStionable register.
Syntax: STATus:QUEStionable:ENABle 0 to 65535
Example: "STAT:QUES:ENAB 65535"
Features: *RST value: –
SCPI: conforming
The ENABle register selectively enables the individual events of the associated EVENt section for
the sum bit in the status byte.
STATus:QUEStionable:PTRansition
This command sets the edge detectors of all bits of the STATus:OPERation register from 0 to 1 for
the transitions of the CONDition bit.
Syntax: STATus:QUEStionable:PTRansition 0 to 65535
Example: "STAT:QUES:PTR 65535"
Features: *RST value: –
SCPI: conforming
STATus:QUEStionable:NTRansition
This command sets the edge detectors of all bits of the STATus:OPERation register from 1 to 0 for
the transitions of the CONDition bit.
Syntax: STATus:QUEStionable:NTRansition 0 to 65535
Example: "STAT:QUES:NTR 65535"
Features: *RST value: –
SCPI: conforming