Specifications

SOURce Subsystem ZVx
1043.0009.50 3.122 E-15
SOURce[1...4]:FREQuency:NLINear:COMP
This command specifies whether the internal signal source or one of the two external sources is to
be used for the compression point measurement.
Syntax:
SOURce[1...4]:FREQuency:NLINear:COMP INT | ESRC1 | ESRC2
Example:
"SOUR:FREQ:NLIN:COMP INT"
Features:
*RST value:
SCPI:
INT
device-specific
SOURce[1...4]:FREQuency:NLINear:SOI
This command specifies whether the internal signal source plus one of the two external sources or
both external sources are to be used for the 2
nd
order intercept point measurement.
Syntax:
SOURce[1...4]:FREQuency:NLINear:SOI IESRC1 | IESRC2 | ESRC12
Example:
"SOUR:FREQ:NLIN:SOI ESRC12"
Features:
*RST value:
SCPI:
IESRC1
device-specific
SOURce[1...4]:FREQuency:NLINear:SOI:OFFSet
This command defines a frequency offset for the second signal source relative to the first one used
in a 2
nd
order intercept point measurement.
Syntax:
SOURce[1...4]:FREQuency:NLINear:SOI <numeric_value>
<numeric_value>::=0 GHz...4 GHz
Example:
"SOUR:FREQ:NLIN:SOI:OFFS 1MHz"
Features:
*RST value:
SCPI:
3 MHz
device-specific
SOURce[1...4]:FREQuency:NLINear:TOI
This command specifies whether the internal signal source plus one of the two external sources or
both external sources are to be used for the 3
rd
order intercept point measurement.
Syntax:
SOURce[1...4]:FREQuency:NLINear:TOI IESRC1 | IESRC2 | ESRC12
Example:
"SOUR:FREQ:NLIN:TOI ESRC12"
Features:
*RST value:
SCPI:
IESRC1
device-specific
SOURce[1...4]:FREQuency:NLINear:TOI:OFFSet
This command defines a frequency offset for the second signal source relative to the first one used
in a 3
rd
order intercept point measurement.
Syntax:
SOURce[1...4]:FREQuency:NLINear:TOI <numeric_value>
<numeric_value>::=0 GHz...4 GHz
Example:
"SOUR:FREQ:NLIN:TOI:OFFS 1MHz"
Features:
*RST value:
SCPI:
3 MHz
device-specific