Specifications

SOURce Subsystem ZVx
1043.0009.50 3.116 E-15
SOURce<1...4>:POWer[:LEVel][:IMMediate]:CAMPlitude:A<1|2>
This command defines the level of the output signal a1 / a2 when the power correction is switched on
or when a power calibration is started.
Syntax:
SOURce<1...4>:POWer[:LEVel][:IMMediate]:
CAMPlitude:A<1|2>
<numeric_value>
<numeric_value>::= -300dBm...+200dBm
Example:
"SOUR:POW:CAMP:A1 -10dBm"
Features:
*RST value:
SCPI:
0 dBm
conforming
SOURce<1...4>:POWer[:LEVel][:IMMediate]:CAMPlitude:ESRC<1|2>
This command defines the level of the external generator 1 / 2 when the power correction is switched
on or when a power calibration is started.
Syntax:
SOURce<1...4>:POWer[:LEVel][:IMMediate]:
CAMPlitude:ESRC<1|2>
<numeric_value>
<numeric_value>::= -300dBm...+200dBm
Example:
"SOUR:POW:CAMP:ESRC2 -10dBm"
Features:
*RST value:
SCPI:
0 dBm
conforming
SOURce<1...4>:POWer[:LEVel]][:IMMediate]:SLOPe
This command defines the variation of the output signal level during a sweep.
Syntax: SOURce<1...4>:POWer[:LEVel][:IMMediate]:SLOPe
<numeric_value>::= 0dBm to 20 dB/GHz
Example: "SOUR2:POW:SLOP 6dB/GHz"
Features: *RST value: 0dB/Hz
SCPI: device-specific
SOURce<1...4>:POWer[:LEVel>][:IMMediate]:EXTernal[1|2]:AMPLitude
This command defines the level of the output signal when an external generator is used.
Syntax:
SOURce<1...4>:POWer[:LEVel][:IMMediate]
:EXTernal[1|2]:AMPLitude <numeric_value>
Example:
"SOUR2:POW:EXT:AMP -20dBm"
Features:
*RST value:
SCPI:
-
device-specific
SOURce<1...4>:POWer[:LEVel>][:IMMediate]:EXTernal[1|2]:SLOPe
This command defines the variation of the output signal level when an external generator is used.
Syntax:
SOURce<1...4>:POWer[:LEVel][:IMMediate]:
EXTernal[1|2]:SLOPe <numeric_value>
Example:
"SOURC2:POW:EXT:SLOP 6dB/GHz"
Features:
*RST value:
SCPI:
0dB/Hz
device-specific