Specifications

ZVx SENSe Subsystem
1043.0009.50 3.111 E-15
[SENSe[1...4]:]SEGMent:CLEar
This command deletes all segments
Syntax:
[SENSe[1...4]:]SEGMent:CLEar
Example:
"SEG:CLE"
Features:
*RST value:
SCPI:
-
device-specific
This command is an event, which is why it is not assigned an *RST value and has no query.
[SENSe[1...4]:]SEGMent:INSert[1...50]
This command inserts a segment into an existing list.
Syntax:
[SENSe[1...4]:]SEGMent:INSert[1...50] numeric_value>,<numeric_value>,
<numeric_value>,<numeric_value>,
<numeric_value> | AUTO,
<numeric_value>,<numeric_value>,
[POSitive | NEGative]"
Example:
"SEG:INS12 9kHz,100kHz,201,-10dBm,AUTO,1,10kHz"
Features:
*RST value:
SCPI:
-
device-specific
[SENSe[1...4]:]SEGMent:DELete[1...50]
This command deletes a segment from a previously defined segment list.
Syntax:
[SENSe[1...4]:]SEGMent:DELete[1...50]
Example:
"SEG:DEL2"
Features:
*RST value:
SCPI:
–
device-specific
[SENSe[1...4]:]SEGMent:COUNt?
This command returns the number of segments previously defined for a sweep.
Syntax:
[SENSe[1...4]:]SEGMent:COUNt?
Example:
"SEG:COUN?"
Features:
*RST value:
SCPI:
–
device-specific
[SENSe[1...4]:]SEGMent:OVERlap
This command activates/deactivates the segmented sweep mode with overlapping segments.
Syntax:
[SENSe[1...4]:]SEGMent:OVERlap ON | OFF
Example:
"SWE:SEGM:OVER ON"
Features:
*RST value:
SCPI:
OFF
device-specific