Specifications

SENSe Subsystem ZVx
1043.0009.50 3.110 E-15
3.6.14.8 SENSe:SEGMent Subsystem
The SENSe:SEGMent-Subsystem defines the parameter for a segmented sweep.
COMMAND PARAMETER UNIT COMMENT
[SENSe<1..4>]
:SEGMent
:DEFine<1...50>
:CLEar
:INSert<1...50>
:DELete<1...50>
:COUNT?
:OVERlap
<numeric_value>,
<numeric_value>,
<numeric_value>,
<numeric_value>,
<numeric_value> | AUTO,
<numeric_value>,
<numeric_value>,
[POSitive | NEGative]
<numeric_value>,
<numeric_value>,
<numeric_value>,
<numeric_value>,
<numeric_value> | AUTO,
<numeric_value>,
<numeric_value>,
[POSitive | NEGative]
<Boolean>
Hz,
Hz,
,
dBm,
s,
,
Hz,
Hz,
Hz,
,
dBm,
s,
,
Hz,
no query
query only
[SENSe[1...4]:]SEGMent:DEFine[1...50]
This command defines a sweep segment. .
Syntax:
[SENSe[1...4]:]SEGMent:DEFine[1...50] <numeric_value>,<numeric_value>,
<numeric_value>,<numeric_value>,
<numeric_value> | AUTO,
<numeric_value>,<numeric_value>,
[POSitive | NEGative]"
Example:
"SEG:DEF3 100kHz,300kHz,401,-20dBm,AUTO,1,10kHz"
Features:
*RST value:
SCPI:
–
device-specific
The ordered parameters are:
START
STOP
POINTS
SOURCE POWER
SWEEP TIME
AVERAGE FACTOR
IF BANDWIDTH
LO to RF