Specifications

ZVx SENSe Subsystem
1043.0009.50 3.109 E-15
3.6.14.7 SENSe:ROSCillator - Subsystem
Dieses Subsystem controls the reference oscillator.
COMMAND PARAMETER UNIT COMMENT
[SENSe]
:ROSCillator
[:SOURce]
:EXTernal
FREQuency
INTernal | EXTernal
<numeric_value>
--
HZ
[SENSe:]ROSCillator[:SOURce]
This command selects the reference oscillator..
Syntax:
[SENSe:]ROSCillator[:SOURce] INTernal | EXTernal
Example:
"ROSC:SOUR EXT"
Features:
*RST value:
SCPI:
-
conforming
If EXT is selected, the external reference signal mut be applied to the rear panel of the instrument.
[SENSe:]ROSCillator:EXTernal:FREQuency.
This command defines the external reference frequency.
Syntax:
[SENSe:]ROSCillator:EXTernal:FREQ
uency
<numeric_value>
<numeric_value> ::= 1 MHz ..15 MHz
Example:
"ROSC:EXT:FREQ 5MHZ"
Features:
*RST value:
SCPI:
10MHz
conforming
The value of the external reference frequency (1 MHz to 15 MHz) is rounded in steps of 1 MHz.