Specifications

SENSe Subsystem ZVx
1043.0009.50 3.106 E-15
[SENSe[1...4]:]FREQuency:CONVersion:MIXer:TFRequency.
This command determines the sign of the third mixer frequency by selecting either the lower or upper
band.
Syntax:
[SENSe[1...4]:]FREQuency:CONVersion:MIXer:TFRequency BAND1 |
BAND2
Example:
"FREQ:CONV:MIX:TFR BAND2"
Features:
*RST value:
SCPI:
BAND1
device-specific
[SENSe[1...4]:]FREQuency:NLINear:COMP:STIMe
This command defines a settling time to be inserted between the generator setting and the start of
data aquisition for a compression point measurement.
Syntax:
[SENSe[1...4]:]FREQuency:NLINear:COMP:STIMe <numeric_value>
<numeric_value>::= 0s...1000s
Example:
"FREQ:NLIN:COMP:STIMe 1s"
Features:
*RST value:
SCPI:
0s
device-specific
[SENSe[1...4]:]FREQuency:NLINear:SOI:STIMe
This command defines a settling time to be inserted between the generator setting and the start of
data aquisition for a 2
nd
order intercept point measurement.
Syntax:
[SENSe[1...4]:]FREQuency:NLINear:SOI:STIMe <numeric_value>
<numeric_value>::= 0s...1000s
Example:
"FREQ:NLIN:SOI:STIMe 1s"
Features:
*RST value:
SCPI:
0s
device-specific
[SENSe[1...4]:]FREQuency:NLINear:TOI:STIMe
This command defines a settling time to be inserted between the generator setting and the start of
data aquisition for a 2
nd
order intercept point measurement.
Syntax:
[SENSe[1...4]:]FREQuency:NLINear:TOI:STIMe <numeric_value>
<numeric_value>::= 0s...1000s
Example:
"FREQ:NLIN:TOI:STIMe 1s"
Features:
*RST value:
SCPI:
0s
device-specific