Specifications

SENSe Subsystem ZVx
1043.0009.50 3.98 E-15
[SENSe[1...4]:]CORRection:OFFSet[1|2]:MAGNitude
This command defines the amplitude offset.
Syntax:
[SENSe[1...4]:]CORRection:OFFSet[1|2]:MAGNitude
Example:
"CORR:OFFS:MAGN 3"
Features:
*RST value:
SCPI:
0
conforming
[SENSe[1...4]:]CORRection:OFFSet[1|2]:PHASe
This command defines the phase offset.
Syntax:
[SENSe[1...4]:]CORRection:OFFSet[1|2]:PHASe
Example:
"CORR:OFFS:PHAS 23"
Features:
*RST value:
SCPI:
0
conforming
[SENSe[1...4]:]CORRection:STATe
This command switches the system error correction of the current channel on or off.
Syntax:
[SENSe[1...4]:]CORRection:STATe
Example:
"CORR:STAT ON"
Features:
*RST value:
SCPI:
OFF
conforming
[SENSe[1...4]:]CORRection:DATA
This command is used for reading and writing system error correction values. The data set contains
a complex value (real and imaginary component) for each test point. Data can be transferred in
ASCII or binary format.
The <string> parameter may assume the following values:
"SCORR1" Directivity, port 1
"SCORR2" Source match, port 1
"SCORR3" Reflection tracking, port 1
"SCORR4" Forward isolation
"SCORR5" Load match, port 1
"SCORR6" Forward transmission tracking
"SCORR7" Directivity, port 2
"SCORR8" Source match, port 2
"SCORR9" Reflection tracking, port 2
"SCORR10" Reverse isolation
"SCORR11" Load match, port 2
"SCORR12" Reverse transmission tracking
"E11" to "E22" Elements of E matrix (15-term method)
"G11" to "G22" Elements of G matrix (7-term and 15-term methods)
"H11" to "H22" Elements of H matrix (7-term and 15-term methods)
"F11", "F21", "F12" Elements of F matrix (15-term method)
Syntax:
[SENSe[1...4]:]CORRection:DATA
<string>,<block> | <numeric_value>...
Example:
"CORR:DATA "SCORR1",<block_data>"
Features:
*RST value:
SCPI:
-
device-specific