Specifications

ZVx MMEMory Subsystem
1043.0009.50 3.69 E-15
MMEMory:CLEar:ALL
This command deletes all device settings in the current directory.
Syntax: MMEMory:CLEar:ALL
Example: "MMEM:CLE:ALL"
Features: *RST value: -
SCPI: device-specific
This command is an "event", which is why it is not assigned an *RST-value and has no query.
MMEMory:SELect[:ITEM]:GSETup
This command includes the general setup data in the list of partial data sets of a device setting which
are to be stored/loaded.
Syntax: MMEMory:SELect[:ITEM]:GSETup ON|OFF
Example: "MMEM:SEL:GSET ON"
Features: *RST value: OFF
SCPI: device-specific
MMEMory:SELect[:ITEM]:HWSettings
This command includes the hardware settings in the list of partial data sets of a device setting which
are to be stored/loaded.
Syntax: MMEMory:SELect[:ITEM]:HWSettings ON|OFF
Example: "MMEM:SEL:HWS ON"
Features: *RST value: ON
SCPI: device-specific
MMEMory:SELect[:ITEM]:MTRace<1...8>
This command includes the selected memory trace data in the list of partial data sets of a device
setting which are to be stored/loaded.
Syntax: MMEMory:SELect[:ITEM]:MTRace<1...8> ON|OFF
Example: "MMEM:SEL:MTR3 ON"
Features: *RST value: OFF für alle Memory Traces
SCPI: device-specific
MMEMory:SELect[:ITEM]:LINes[:ALL]
This command includes all limit lines in the list of partial data sets of a device setting which are to be
stored/loaded.
Syntax: MMEMory:SELect[:ITEM]:LINes[:ALL] ON|OFF
Example: "MMEM:SEL:LIN ON"
Features: *RST value: ON
SCPI: device-specific
At the same time, this command selects all active limit lines.