Specifications

MMEMory Subsystem ZVx
1043.0009.50 3.66 E-15
MMEMory:DATA
This command writes block data to a specified file.
Syntax:
MMEMory:DATA
MMEMory:DATA?
<file_name>,<block>
<file_name>
<file_name> ::= DOS file name
<block> ::= binary data block
Example:
"MMEM:DATA? ’TEST01.HCP’"
Features:
*RST value:
SCPI:
–
conforming
The delimiter must be set to EOI in order to obtain a perfect data transfer.
MMEMory:DELete
This command deletes the files indicated.
Syntax: MMEMory:DELete <file_name>
<file_name> ::= DOS file name
Example: "MMEM:DEL ’TEST01.HCP’"
Features: *RST value: –
SCPI: conforming
The file name may comprise the specification of the path and, eventually, the name of the drive.
Indication of the path is according to the DOS conventions. This command is an event, which is why
it is not assigned an *RST value and has no query.
MMEMory:INITialize
This command formats the disk in drive A.
Syntax: MMEMory:INITialize <msus>
<msus> ::= 'A:'
Example: "MMEM:INIT ’A:’"
Features: *RST value: –
SCPI: conforming
Formatting deletes all data stored on the floppy disk. This command is an event, which is why it is
not assigned an *RST value and has no query.
MMEMory:LOAD:AUTO
This command defines the device settings to be automatically loaded upon switching on the device.
Syntax:
MMEMory:LOAD:AUTO 1,<file_name>
<file_name> ::= DOS file name
FACTORY means the data last set in the unit
Example:
"MMEM:LOAD:AUTO 1,’A:TEST.CFG’"
Characteristics:
*RST value:
SCPI:
–
conforming
The file contents are read after switching on the device and activated as the new device setup. In
addition to the file name, the drive designation and the path name may be specified. The path name
should be in conformance with DOS conventions. This command is an event and therefore includes
neither an *RST value nor a query.