User`s guide

Controlling the Speaker
You can enable or disable the computer’s speaker using the
following three programs:
0 SETUP
0 EISA Configuration utility
0 EISA System Utilities.
Both the SETUP program and the EISA Configuration utility
allow you to define the default setting for the speaker. Follow
the instructions in Chapters 2 and 3.
If you want to change the default setting temporarily, use the
EISA System Utilities, as described below. Then, whenever you
turn off or reset the computer, the setting returns to the default
setting you selected in the SETUP program or the EISA
Configuration utility.
1. Insert the System Configuration diskette in drive A.
2. Log onto drive A and type SD. Press Enter at the next two
screens to bring up the Main Menu.
3. Select Access System Utilities from the Main Menu.
You see the following:
System Utilities Menu
Password Utility
System Speed FAST
System Speed SLOW
Speaker ON
Speaker OFF
Cache ON
Cache OFF
EXIT Utilities
4-20 Using your Computer